Figure 3-3: remove hex head screws (rear panel), Figure 3-4: hdd bracket retention screws – IEI Integration TANK-600-D2550_N2600 User Manual
Page 26
Advertising
TANK-600 Em b e d d e d S ys te m
P a g e 15
Figure 3-3: Remove Hex Head Screws (Rear Panel)
S te p 4:
Remove the bottom cover from the device.
S te p 5:
Remove the four HDD bracket retention screws (Figure 3-4).
Figure 3-4: HDD Bracket Retention Screws
S te p 6:
Lift the HDD bracket out of the TANK-600.
S te p 7:
Slide the HDD to the HDD bracket and secure the HDD to the HDD bracket
using four retention screws (Figure 3-5).
Advertising