IEI Integration TANK-600-D2550_N2600 - Manual (Page 65)

TANK-600 Em b e d d e d S ys te m
P a g e 54

IO=2F8h;
IRQ=3, 4
Serial Port I/O port address is 2F8h and the interrupt
address is IRQ3, 4
 Device Mo d e [RS232]
Use the Device Mode option to select the serial port mode.

RS232 D EFAULT Enables serial port RS-232 support.

RS422 Enables serial port RS-422 support.

RS485 Enables serial port RS-485 support.
5.3.7.1.3 S e ria l P o rt 3 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=3E8h;
IRQ=10
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10

IO=3E8h;
IRQ=10, 11
Serial Port I/O port address is 3E8h and the interrupt
address is IRQ10, 11

IO=2E8h;
IRQ=10, 11
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ10, 11