IEI Integration PPC-5152-D525 v2.10 - Manual (Page 52)

PPC-5152-D525 Falt-bezel Panel PC
Page 38
Step 4: Slide the panel PC with the attached rack/cabinet bracket into a rack or cabinet
(Figure 3-22).
Figure 3-22: Install into a Rack/Cabinet
Step 5: Once the panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (Figure 3-22).
3.10.4 Stand Mounting
The PPC-5152-D525 can be installed on any stand that supports the standard VESA
mounting interface. An example stand is shown below.
Figure 3-23: VESA Compliant Stand
To install the PPC-5152-D525 on the stand, follow the directions below.