IEI Integration PPC-5152-D525 v2.10 - Manual (Page 67)

PPC-5152-D525 Falt-bezel Panel PC
Page 53
Step 1: Locate the USB connectors. The locations of the USB connectors are shown in
6
Figure 1-4.
Step 2: Align the connectors. Align the USB device connector with one of the connectors.
See
6
Figure 3-39 .
Figure 3-39: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector.
3.11.11 VGA Connector
CN Label: VGA
CN Type: 15-pin Female
CN Location: See
6
Figure 1-4
CN Pinouts: See
6
Figure 3-40 and
6
Table 3-10
The VGA connector connects to a monitor that accepts VGA video input. The pinouts of
the VGA connector is shown below.