Figure 3-16: ppc-3710a-n26 hdd retention screws – IEI Integration PPC-37xxA-N26 v1.00 User Manual
Page 47
Advertising
PPC-37xxA-N26 Panel PC
Page 31
Figure 3-15: PPC-3710A-N26 HDD Bracket Retention Screws
Step 3:
Attach the hard drive in the bracket
. To do this, slide the hard drive onto the
bracket until it connects with the SATA connector at the back. Fasten the four
retention screws on the sides (Figure 3-16).
Figure 3-16: PPC-3710A-N26 HDD Retention Screws
Step 4:
Install the hard drive bracket (with hard drive and SATA cable attached) into the
panel PC and fasten the four hard drive bracket screws.
Step 0:
Advertising