Figure 3-20: optical drive screws, Figure 3-21: optical drive sata cable – IEI Integration PPC-37xxA-N26 v1.00 User Manual
Page 50
Advertising
PPC-37xxA-N26 Panel PC
Page 34
Step 4:
Install the optical drive in the same position as the previously removed blank
optical drive plate. Fasten the same four screws to attach the optical drive to the
bracket.
Figure 3-20: Optical Drive Screws
Step 5:
Attach the SATA cable to the back of the optical drive.
Figure 3-21: Optical Drive SATA Cable
Step 6:
Reinstall the optical drive bracket into the PPC-3712A-N26 and fasten the
optical bracket screws.
Step 0:
Advertising