IEI Integration PPC-37xx-N270 v2.11 - Manual (Page 47)

PPC-37xx-N270 Panel PC
Page 35
Figure 4-10: PPC-3712 HDD Bracket Retention Screws
Step 4: Install the HDD into the PPC-3712 by aligning the retention screw holes in the
base of the HDD brackets with the retention screw holes on the metal sheet.
Insert the four retention screws, two into the base of each HDD bracket
(Figure 4-11.)
Figure 4-11: PPC-3712 HDD Retention Screws
Step 5: Connect the SATA cable from the SATA connector on the motherboard to the
rear of HDD. Step 0: