IEI Integration PPC-37xx-N270 v2.11 - Manual (Page 65)

PPC-37xx-N270 Panel PC
Page 53
Step 3: Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The flat panel PC arm mount retention screw holes are shown in
Figure 4-29 .
Figure 4-29: Arm Mounting Retention Screw Holes
Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the
flat panel PC. S te p 0 :
Figure 4-30: Arm Mounting