Figure 6-7: attaching the antennas – IEI Integration AFL2-W21-H61 User Manual
Page 132
Advertising
AFL2-W21A/AB-H61
P a g e 113
S te p 9:
Push the WLAN card down until the spring retainer clips lock into place.
S te p 10:
Connect the main (1) and auxiliary (2) antennas. The main antenna is indicated
with a strip of black electrical tape. See Figure 6-7.
NOTE:
To ensure the WLAN module functions correctly, please make sure the
WLAN antennas are attached in the proper configuration.
Figure 6-7: Attaching the Antennas
S te p 11:
Replace the internal cover and secure it to the chassis using the previously
removed retention screws.
S te p 12:
Replace the back cover and secure it using the previously removed retention
screws.
Advertising