IEI Integration AFL2-W21-H61 - Manual (Page 72)

AFL2-W21A/AB-H61
P a g e 53
S te p 9: Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
S te p 10: Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (Figure 4-17).
Ensure that all four of the mounting screws fit snugly into their respective slotted
holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 4-17: Chassis Support Screws
S te p 11: Secure the panel PC by fastening the retention screw of the wall-mounting
bracket. (Figure 4-18). S te p 0: