IEI Integration LCD-KIT Series v3.00 - Manual (Page 33)

LCD-KIT
P a g e 24
5.2.3 P a c kin g Lis t
All the monitors in the LCD-KIT series are shipped with the following components:
 1 x LCD-KIT series LCD monitor.
 1 x AC Power cable
 1 x VGA Cable
 1 x 60W Power Adapter
 5 x Replacement Round Head Screw
 5 x Replacement Flat Head Screw
 5 x Replacement Wire Strain Band
 1 x Utility CD
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
5.3 P re -in s ta lla tio n P re pa ra tio n
5.3.1 To o ls
Before installing the LCD-KIT series LCD monitor, make sure the following tools are on
hand:
 Philips (crosshead) screwdriver: All the retention screws on the system are
Philips screws.
 Soft working mat: When the LCD-KIT series LCD monitor is installed, the
screen is placed on the working surface. It is therefore important to rest the
MPC industrial workstation on a soft mat that cannot damage the LCD screen
on the front of the LCD-KIT series LCD monitor.