IEI Integration LCD-KIT Series v3.00 - Manual (Page 55)

LCD-KIT
P a g e 46
B.1.2 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the installation of the LCD-KIT
Series may result in permanent damage to the LCD-KIT Series and
severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the LCD-KIT Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the LCD-KIT Series is opened and any of the electrical
components are handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging any electrical component.
 Self-grounding: Before handling any electrical component, touch any
grounded conducting material. During the time the electrical component is
handled, frequently touch any conducting materials that are connected to the
ground.
 Use an anti-static pad: When configuring or working with an electrical
component, place it on an antic-static pad. This reduces the possibility of ESD
damage.
 Only handle the edges of the electrical component: When handling the
electrical component, hold the electrical component by its edges.
B.2 Ma in te n a n c e a n d Cle a n in g P re c a u tio n s
When maintaining or cleaning the LCD-KIT Series, please follow the guidelines below.
B.2.1 Ma in te n a n c e a n d Cle a n in g
Prior to cleaning any part or component of the LCD-KIT Series, please read the details
below.