IEI Integration DM_Series v2.04 - Manual (Page 62)

DM Series Monitor
Page 48
5.2.3 Packing List
All the monitors in the DM series are shipped with the following components:
ƒ 1 x DM-190/170/150/121/104/84/65 series LCD monitor.
ƒ 1 x AC power cable
ƒ 1 x VGA cable
ƒ 1 x 50W AC power adapter (DM-190 / 170 / 150)
ƒ 1 x 36W AC power adapter (DM-121/ 104 / 84 / 65)
ƒ 5 x Replacement round head screw
ƒ 5 x Replacement flat head screw
ƒ 5 x Replacement wire strain band
ƒ 1 x User manual on CDROM
ƒ 1 x Touch panel RS-232 cable
ƒ 1 x Touch panel USB cable
ƒ 1 x Touch Pen
ƒ 1 x Driver CDROM
ƒ 1 x Power cable for terminal block (Optional for M model)
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
5.3 Pre-installation Preparation
5.3.1 Tools
Before installing the DM series LCD monitor, make sure the following tools are on hand:
ƒ Philips (crosshead) screwdriver: All the retention screws on the system are
Philips screws.
ƒ Soft working mat: When the DM series LCD monitor is installed, the screen
is placed on the working surface. It is therefore important to rest the MPC
indutrial workstation on a soft at that cannot damage the LCD screen on the
front of the DM series LCD monitor.