IEI Integration DM_Series v2.04 - Manual (Page 81)

DM Series Monitor
Page 67
Step 1: Attach the DIN rail mounting bracket to the rear of the monitor. Secure the
bracket to the monitor with the supplied retention screws (
5
Figure 5-23 ).
Figure 5-23: DIN Rail Mounting Bracket
Step 2: Make sure the inserted screw in the center of the bracket is at the lowest
position of the elongated hole (
5
Figure 5-24 ).
Figure 5-24: Screw Locations
Step 3: Place the DIN rail flush against the back of the mounting bracket making sure
the edges of the rail are between the upper and lower clamps (
5
Figure 5-25 ).