IEI Integration IOVU-751R User Manual
Page 40
Advertising
IOVU-751R-CE5/UX-R10 User Manual
Page 31
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the IOVU-751R and tighten until the screw
shank is secured against the rear panel (
216H216H
Figure 4-10
).
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
217H217H
Figure 4-10
).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.
NOTE:
In the diagram below the bracket is already installed on the wall.
Figure 4-10: Chassis Support Screws
Advertising