IEI Integration IOVU-751R User Manual
Page 44
Advertising
IOVU-751R-CE5/UX-R10 User Manual
Page 35
Step 2:
Once the mounting arm has been firmly attached to the surface, lift the
IOVU-751R onto the interface pad of the mounting arm.
Step 3:
Align the retention screw holes on the mounting arm interface with those on
theIOVU-751R, as shown in
221H221H
Figure 4-15
.
Figure 4-15: Arm Mounting Retention Screw Holes
Step 4:
Secure the IOVU-751R to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the IOVU-751R.
Step 0:
Figure 4-16: Arm Mounting (ARM-11-RS)
Advertising