Avocent LongView IP - Manual (Page 15)

5
Installation
Getting Started
Before installing your LongView IP KVM extender, refer to the list below to ensure that you have
all the items necessary for installation.
Items needed to install the LongView IP KVM extender
• Receiver
• Transmitter
• External power supply for the receiver
• IEC power cord
• LongView IP KVM Extender Quick Installation Guide
• UTP cable (not supplied)
• Three-wire serial cable or null modem cable (not supplied)
Optional items
To power the transmitter if a remote workstation does not have two available USB ports:
• A power supply (contact Avocent more details)
To connect a VGA monitor to the receiver:
• A DVI to VGA adaptor (not supplied)
To connect the transmitter to a remote workstation that has VGA video output:
• A VGA to DVI-I adaptor (not supplied)
To connect the transmitter to a remote workstation that has DVI-D video output:
• A DVI-D to DVI-I adaptor (not supplied)
Mounting Option
The receiver mounts to either the rear of a flat-panel monitor via a mounting plate accessory
(ordered separately) or is desk-mountable via a mounting kit, also available from Avocent.
C H A P T E R
2