Acura 08B26-S3V-2000-91 - Manual (Page 4)

4 of 7 BII 24550 (0209) © 2002 American Honda Motor Co., Inc - All Rights Reserved.
11. At the radio opening, adjust the BUS cable so it's
the same length as the vehicle harness.
12. Secure the BUS cable to the vehicle harness with
three wire ties in the areas shown.
13. Attach the black cushion tape at the edge of the
center console in the area shown.
14. Install the right and left base brackets into the holes
in the driver’s seat risers, and install two
6 x 12 mm flange bolts into each bracket. Do not
tighten the bolts yet.
Make the BUS cable
and vehicle harness
are the same length.
WIRE TIE
WIRE TIE
VEHICLE
HARNESS
BUS
CABLE
BUS CABLE
BLACK
CUSHION
TAPE
6 x 12 mm
FLANGE BOLTS (4)
LEFT
BASE
BRACKET RIGHT
BASE
BRACKET