Probuilt Professional Lighting ECO Uplight - Manual (Page 3)

• Keep power cord(s) out of harm’s way and clear of the work area.
• Keep ECO Uplight dry wherever possible.
• Never leave the unit in use without supervision.
• Do not use if the unit or the power cord appears to be damaged.
• Do not place the unit near a source of heat.
• Ensure the mains cable does not present a trip hazard. Do not run cable
across walkways. Once the cable has been routed secure cable in position.
• Ensure the mains power cable is fully unwound before use.
• Do not remove plug from mains supply by pulling on power cord.
• If the external flexible cable or cord of the lumniaire is damaged, it shall be
exclusivley replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard.
ELECTRICAL SAFETY GUIDELINES
PLEASE COMPLY WITH THE SPECIFIED ELECTRICAL REQUIREMENTS.
Power Supply Identification The power supply of this ECO Uplight unit is shown on
the identification label and the rating plate, which are found on the external
packaging and the base of the unit respectively.