Probuilt Professional Lighting ECO Uplight - Manual (Page 5)

LIGHTING TUBE REPLACEMENT
Ensure that only replacement lighting tubes of the correct type are used.
ECO Uplight is supplied with either an 18W (2ft) or a 36W (4ft) Philips 865 Colour
Rendition ‘Cool Daylight’ T8 triphosphor tube.
1. Switch OFF ECO Uplight at the mains power supply and disconnect. Allow
adequate time for cooling.
2. Unscrew the lens cap and remove the electrical fitting from the lighting tube
assembly by pulling it away gently in a vertical direction.
3. Lift the lighting tube out of the lighting tube assembly.
4. Place the new lighting tube into the lighting tube assembly making sure that the
two end-pins are correctly inserted into the lower anti-shock tube buffer.
DO NOT FORCE – CORRECT INSERTION SHOULD BE STRAIGHTFORWARD.
5. Replace the electrical fitting, again making sure that the end-pins are inserted
securely into the upper anti-shock tube buffer.
6. Replace the lens cap ensuring a correct seal to prevent the ingress of water or
dust. Repeat this procedure if the lens cap becomes cross-threaded. Adaily
inspection is recommended to check for any physical damage or abrasions to
power cord. Replace tubes and guards when necessary. Also check that
ECO Uplight is positioned to maintain safe site conditions.
CLEANING
We recommend that you use only a damp cloth to clean your ECO Uplight. Please
note that some chemicals used in cleaning agents may damage the diffuser and in
no circumstances should you use any such products.
SERVICE RECOMMENDATIONS
Only suitably qualified personnel should service the unit. If you have a problem with
your unit please return it to the outlet from where you purchased it, ensuring that you
have full details of your product as described on the product rating plate. Should it
be necessary for repairs to be undertaken, it is important to provide the suitably
qualified repairer with the complete unit. Should you require service under the terms
of our guarantee you will need to present proof of purchase.
NOTE: Service repairers act on their own behalf and are not empowered to commit
or legally bind Birchwood Products, in any manner whatsoever.