American Megatrends MAN-STOR-ITX27-CLI - Manual (Page 21)

Chapter Two: Command Set 15
Command Argument Description
-c/--containername <containername>
-m/--mode {0/1/2}
For example: set –t lunwritecachemode –v v1 –c c1
–m 0 iscsi
0 – Write through
1 – Write back
add iscsi -t/--type {processor}
-n/--targetname <target suffix> Adds the processor to the specified
target (used for backup).
remove iscsi -t/--type {processor}
-n/--targetname <target suffix> Removes the processor from the
specified target.
get iscsi -t/--type {statistics}
For example: get –t statistics iscsi Gets the iSCSI statistics, for
example, No. of iSCSI PDU sent
and received, payload, and
login/session failures.
get iscsi -t/--type {portalstatus}
-p/--ipaddress <ipaddress> Gets the iSCSI Portal Status.
get iscsi -t/--type {servicestatus} Gets the iSCSI service status.
(Active/Inactive)
add iscsi -t/--type {lun}
-v/--volumename <volume name>
-c/--containername <container name>
-n/--targetname <targetsuffix> Adds the LUN to the specified
target.
remove iscsi -t/--type {lun}
-v/--volumename <volume name>
-c/--containername <container name>
-n/--targetname <target suffix> Removes the LUN from the
specified target.
get iscsi -t/--type {sessions}
For example: get –t sessions iscsi Gets the current sessions details
including session id.
remove iscsi -t/--type {session}
-s/--sessionid <session id> Terminates the session with the
given ID. To avoid automatic
reconnection by the initiator, you
will need to change the security
settings for that target prior to
termination.
list iscsi -t/--type {tgt} Gets the List of Targets available.
list iscsi -t/--type {lun}
-n/--targetname <target suffix> Gets the available LUNs in the
given target.
get iscsi -t/--type {tgtauthsettings}
-n/--targetname <target suffix> Gets the Authorization settings for
the target.
set iscsi -t/--type {peersecret}
-i/--initiatorname < initiatorname. (Default : none)>
-s/--peersecret
For example: set –t peersecret –I iqn.1991-
10.com.microsoft:newbox –s iscsi Sets the peer secret for the initiator.
You will be prompted to enter this
twice.
set iscsi -t/--type {tgtauthsettings}
-n/--targetname <targetsuffix>
-u/--username <user name ‘none’ for default >
-r/--secretname <user password ‘none’ for default >
-i/--initiatorname <initiator name – ‘none’ for
default> Sets the Authorization settings for
the target. The secret name should
be at least 12 characters in size
This will give exclusive access to
the LUN for the specified user and
initiator for maximum security.
get iscsi -t/--type {lun}
-n/--targetname <target suffix>
-v/--volumename<volumename>
-c/--containername<containername>
-i/--info Gives the LUN's Information for
the specified target.
get iscsi -t/--type {tgtoptimizations}
-n/--targetname <target name> Gives the Target's Optimization
settings (i.e. whether multiple
initiator logins are supported).
set iscsi -t/--type {tgtoptimizations}
-n/--targetname <target suffix>
-p/ --multiplesession {y/n}
-g/--nopinterval < nop ping internal > Sets the Target's Optimization
settings to allow/disallow multiple
initiators logging in to a target
simultaneously.