American Megatrends MAN-STOR-ITX27-CLI - Manual (Page 26)

StorTrends® iTX Software CLI (Command Line Interface) (Version 2.7) User’s Guide 20
set ug -t/--type {group}
-g/--groupname <groupname>
-u/--username <username>
-x/--xml Adds the given user to the specified
group. Multiple users can be added
using –u/--username switch.
(maximum of 8 users at a time)
Protocol Configuration
These commands configure the various network protocols supported.
Command Argument Description
get protocol -t/--type {cifs/nfs/http/snmp/nis/ads/https/ftp/upnp} Gets the status of cifs, nfs, http,
snmp, nis, or ads protocols.
set protocol -t/--type
{cifs/nfs/apple/http/snmp/nis/ads/https/ftp/upnp}
-d/--disable or
-e/--enable
-x/--xml
For example: set –t cifs –e protocol Enables or Disables the specified
protocol.
get protocol -t /--type {snmp}
-n/--communityname
For example: get –t snmp –n protocol Gets the community name for
snmp.
get protocol -t/--type {cifs}
-w/--winserver Gets the Wins server address.
set protocol -t/--type {cifs}
-s/--winsserver <winsserver name>
-m/--mtype {wg/nt/ads}
-w/--workgroup <workgroupname>
-x/--xml Sets the Wins server address.
set protocol -t/--type {snmp}
-n/--communityname <communityname> Sets the snmp community name
By default, the public community
name is supported.
set protocol -t/--type {nfs}
-i/--ipaddress <ipaddress or “world” >
-d/--disable or
-e/--enable
-x/--xml
For example:
set -t nfs -i 10.0.0.124 -i 10.0.0.123 -e -x protocol Sets the nfs clients.
list protocol Lists all the protocols and
whether they are enabled or
disabled.
get protocol -t/--type {nfs}
-c/--count Gets the number of NFS clients
that have access to NAS shares.