Rapid-Air SERVO FEED: 200T & TX - Manual (Page 28)

27
SERVO FAULT DISPLAY
The Pacific Scientific drive has a list of internal faults and displays the number of that fault on
it’s readout located on the front of the drive. Rapid Air now displays the fault on the keypad
display. If a fault occurs the screen will display the number and the name of the fault, but
there will not be an explanation accompanying the fault. This is a tool to help you to trouble
shoot if the servo fails to perform when commanded.
If a fault was displayed the servo controller will have to be turned off and restarted to clear the
fault. If the fault is still present when the Pacific Scientific unit is restarted, the fault may not
be displayed on the keypad screen as the fault will not let the internal program restart. The
control panel will have to be opened to view the fault again.
A list of probable faults and some explanation is included in this section. If more help is
required, then Rapid Air will have to be contacted.