Rapid-Air PALLET MASTER (PMD) HIGH SPEED: 35, 50 & 100 SERIES User Manual
Page 3
Pre-Operation Check
Before placing any material on the turntable ensure that all functions are in the correct mode for
machine operation. i.e.
1. Switch “OFF”
2. Run/Stop/Jog “stop” position.
3. Control arm arranged with counter weight toward the turntable at its max. extension.
4. Lock the control head.
5. Rotation directions switch to agree with the decoiling direction of the material on the pallet
that is ready to be loaded onto the PMD.
6. Loop range at maximum 3”.
7. Loop height—0.
8. Stock direction switch located just under the control arm pivot, switch to direction of mate-
rial flow to the press.
Start up and Run Check
9. Switch “ON”.
10. Run / Stop / Jog - “RUN”
11. Slowly push (rotate) the control arm toward the turntable to start the rotation.
(a) If the table turns in the wrong direction, reverse rotation direction switch.
(b) The turntable speed should increase as the control arm is moved toward the table.
If otherwise. Reverse the stock direction switch.
3