Rapid-Air PALLET MASTER (PMD) HIGH SPEED: 35, 50 & 100 SERIES - Manual (Page 5)

Electronic loop height adjustment
Eight different loop sensing arm operating positions are
selected manually during set-up. In operation, the desired
position is monitored and maintained electronically. Each
separate position will move the operating angle of the arm
so that top-to-bottom travel is located to accommodate
specific material and loop height requirements.
Loop sensing arm operating range
30º- Loop sensing arm travels through a
full 30º arc to vary turntable rotation speed
from slow to full speed.
20º - Travel through a 20º arc changes
rotation speed from slow to full speed.
10º - Slow to full speed varies as the loop
sensing arm travels in a 10º arc.
5º - Only the first 5º of loop sensing arm
travel is required to control turntable
rotation from slow through full speed.
5