ADIC 22 - Manual (Page 5)

3
6. Press the interface connector on the Barcode Reader module into the mating interface connector on the inside top panel.
7. Push in and tighten the thumbscrew on the Barcode Reader module bracket until it secures the Barcode Reader module to the
inside top panel.
Barcode Reader Module Installed
8. Install the trim panel by snapping it into position in front of the Barcode Reader module.
Trim Panel Installed
9. Connect the FastStor AC line cord to the AC source outlet.
10. Power up your FastStor by pressing the POWER button.
Note
Your FastStor will automatically sense the presence of the Barcode
Reader module when power is applied.
Trim Panel
Barcode Reader Module