Progressive International Electronics EZ Wire DBox - Manual (Page 33)

PI DBox Installation Guide
Version 5.0 January 2012
Page 29
Select option 0 for Server Configuration and the following screen will appear. Assign new
numbers for the first field of the IP address and press Enter or leave unchanged and press
Enter to keep the first field the same. You will be prompted to assign new numbers for the
second field or to accept the default numbers by pressing Enter. This process continues for
each of the four fields. Only one number in one field must be changed to make the IP
address unique — or each of the fields may be changed if it provides a more systematic setup
for the programmer. (Use caution that numbers do not fall outside the range of the SUBNET
MASK.)
Press Enter for all other options.