Maple Systems 5000HD Series - Manual (Page 104)

98 EZwarePlus Programming Manual
1010-1015, Rev. 03
3. Modify the settings according to your requirements.
4. Click OK. The main screen of EZwarePlus is redisplayed with the Multi. Copy command executed.
Multiple objects can be created according to these parameters:
Pitch vs. Interval: This setting affects how EZwarePlus places the copies of an object on the screen relative to
each other. The Pitch setting will interpret the X Distance setting as the distance from the left side of an object
to the left side of the next object and the Y Distance setting as the distance from the top of one object to the
top of another object.
The Interval setting will interpret the X Distance setting as the distance from the right side of one object to the
left side of the next object. The Y Distance setting is the distance from the bottom of one object to the top of
the next object.
X, Horizontal Distance and Y, Vertical Distance: These settings determine the spacing (in pixels) between
objects.
Quantity X and Quantity Y: These settings determine the number of copies to be made along the X axis
(horizontal) and the Y axis (vertical).
Left to right and Top to bottom: When Left to right is selected, objects are created and addressed in the X-
axis first and then in the Y-axis. When Top to bottom is selected, objects are created and addressed in the Y-
axis first and then in the X-axis.
Adjust Distance: This is the offset used when assigning a new address to each new copy. For example, if 1 is
selected, then EZwarePlus will add one to the address for each new copy made.
Using the Window Copy command
The Window Copy command is used to copy a window from an existing project into the project that you are
currently editing. This feature reduces time spent creating new projects since you can now use windows that
you created for other similar projects.