Maple Systems 5000HD Series - Manual (Page 20)

14 EZwarePlus Programming Manual
1010-1015, Rev. 03
Click Start VNC to enable the VNC server.
Click the VNC login password to enter the password used to login to the HMI with a remote VNC viewer. The
default password is 111111.
Click Apply and then click OK to save the settings and exit the System Settings window.
 The VNC server option in the System Parameters > System Settings tab will override the VNC login
password in the HMI when Password from project is checked.
 The HD Series does not support VNC.
16. Click on the Misc(ellaneous) tab to display the Backlight dialog. The Brightness control adjusts the brightness
of the HMI’s backlight. Use the mouse or touchscreen to roll the wheel. Rolling to the left decreases the
brightness, rolling to the right increases the brightness.
 System tags “Backlight Up (LB9040),” “Backlight Down (LB9041),” and “Backlight Index (LW9040)” can be
used to adjust the brightness at runtime (range 0-31).