Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 19)

GP3000H Series Hardware Manual
1-6
‹ Edit Mode Peripherals
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!”
(http://www.pro-face.com/otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu-[Connect to Support Site
“Otasuke Pro!” (O)] command.
*2 For instructions on how to connect between USB-Serial (RS-232C) Conversion Cable and your PC,
always refer to the “GP-Pro EX Reference Manual ->Transferring Projects and Data -> COM Transfer
Connections”.
*3 Certain types and models of PCs cannot be connected.
GP Interfaces
(1) GP3000H Cable Connector
(2) USB Host Interface
(3) CF Card Interface
SEE GP-Pro EX Reference Manual
USB Transfer Cable
CA3-USBCB-01
USB-Serial (RS-232C)
Conversion Cable
CA6-USB232-01 RS-232C Cable *2
(Prepared by user)
Modem *1
(Commercial type)
USB Port
Serial Port
Personal Computer *3
(Commercial type)
Screen Editor
Software
GP-Pro EX
To an Ethernet Network
CF Card
CA3-CFCALL/128MB-01
CA3-CFCALL/256MB-01
CA3-CFCALL/512MB-01
CA6-CFCALL/1GB-01
CA8-CFCALL/2GB-01
CF Card Adapter
GP077-CFAD10
PCMCIA Slot
Telephone lines
(3)
(2)
(1)
GP Unit
USB Memory Strage *1
(Commercial type)
HUB
(Commercial type)
GP3000H Soft-type 3 m
Direct-connect Cable
GP3000H-CBLS-3M
GP3000H Soft-type 5 m
Direct-connect Cable
GP3000H-CBLS-5M
GP3000H Soft-type 10 m
Direct-connect Cable
GP3000H-CBLS-10M
GP3000H Hard-type 10 m
Direct-connect Cable
GP3000H-CBLH-10M