Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 10)

9
Package Contents
The following items are included in the GP unit's package. Before using the GP, please check that all items listed here are
present.
This unit has been carefully packed, with special attention to quality. However, should you find anything damaged or
missing, please contact your local GP distributor immediately.
About Revision
The nameplate on the GP has the revision number of the GP. In the example below, the asterisk, which is placed at the
“A” position, shows that the revision number is “A”.
GP Unit: 1 • English and
Japanese
Installation Guides
(1 of each)
• Warning/Caution
Information (1)
Hand Strap: 1 Hanger: 1
(Attached to the GP
unit)
The hanger is used to
hang the GP unit on
a wall.
Emergency Switch Guard: 1
Attachment Screws: 3
Function Switch
Sheet:
Touch Pen: 1
(Attached to the GP
unit)
(Only for the GP unit with the Emergency Switch) 1 set (Attached to the
GP unit)
5 sets (for replacement)
Connector Cover: 1
(Attached to the GP
unit)