Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 47)

GP3000H Series Hardware Manual
3-2
3.1 Fixing the GP3000H
This section explains cautions involved with handling the GP3000H Series units.
Be sure to operate the GP unit only after securing it, using any of the following three methods.
Use the GP3000H Series by correctly attaching the hand strap (included), neck strap (optional), or the wall-
mount Adapter (optional).
3.1.1 Hand Strap
„ Attaching the Hand Strap
The hand strap (included) that attaches to the GP3000H Series unit is used to hold the GP unit by hand, and to
prevent it from dropping during use. Attach the hand strap using the following procedure.
(1) Insert the hand strap into the hand strap
mounting slots on the GP unit rear panel, as
shown.
(2) Insert both ends of the hand strap into the
buckles as shown, and fasten them securely.
Be sure to use the hand strap or neck strap, or attach the GP unit to a wall with the Wall
Mount Adapter. Dropping the unit may result in injury to the user or damage to the unit.