2 replacing the function switch sheets, 2 replacing the function switch sheets -5 – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 50
Chapter 3 Fixing the GP and Attaching Accessories
3-5
3.2.2
Replacing the Function Switch Sheets
(1)
There are two holes located on the lower right
and left corners of the GP for replacing the
function switch sheet. Remove the cover on the
insertion hole, pull out the current sheet, and
insert the new sheet (sold separately).
(2)
Put the cover back on the insertion hole.
•
It’s easy to insert the function switch
sheet with the edge bent on the dotted
line as shown.
• Be sure to insert the cover on the insertion hole all the way in. Failure to do so
may remove the droplet-proofing.
•
The cover cannot be pressed into place if the sheet sticks out from the insertion hole. Use one of
the touch pens (included) to push the sheet all the way into the GP.
Function Switch Sheet
Function
Switch Sheet
insertion hole