Apple PowerBook G3 Series - Manual (Page 2)

Take Apart Tools - 1
Tools
Use the following tools for procedures in this chapter:
• #8 Torx driver (for most screws)
• #6 Torx driver (for the PC Card cardcage)
• Phillips screwdriver (for the heat sink and modem)
• Flat-blade nylon or plastic tool
• Dental pick or hook tool (to open flex connectors)
• Phillips-head jeweler’s screwdriver for some displays
• Torque screwdriver (highly recommended for some
replacement procedures)
Note:
Magnetic Torx drivers are invaluable for replacing
some screws. However, if you use a magnetic driver, do not
use it around the hard drive or the sleep reed switch.
Caution:
To avoid damaging or losing parts, ensure your
work surface is clean.