Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 3)

3
2. Package Contents
(1) CANopen Master Unit (1)
(2) CANopen Master Unit
Hardware Manual <This
Manual> (1)
This unit has been carefully
packed, with special attention to
quality. However, should you
find anything damaged or
missing, please contact your
Pro-face local distributor immediately.
3. Supported Model
LT3000 Series
• The LT with a project file, GP-Pro EX
Ver.2.2 or later, should be used. (Ver-
sion of transfer tool should be GP-
Pro EX Ver.2.2 or later.)
4. About the Manual
For detailed information on the LT3000
Series, refer to Pro-face's PDF manuals
such as follows:
• LT3000 Series Hardware Manual
• Maintenance/Troubleshooting
The manuals can be selected from the help
menu of GP-Pro EX or downloaded from
Pro-face Home Page.
URL
http://www.pro-face.com/otasuke/
5. Inquiry
Do you have any questions about
difficulties with this product?
Please access our site anytime that you
need help with a solution.
http://www.pro-face.com/otasuke/
6. UL/c-UL/CSA Approval
The following unit is UL/c-UL/CSA listed
products: (UL File No.E220851, UL File
No.E210412, CSA File No.219866)
This product conforms to the following
standards:
• UL508
Standard for Industrial Control Equipment
Industrial Control Equipment
• ANSI/ISA-12.12.01-2007
*1
Nonincendive Electrical Equipment for
Use in Class I and II, Division2 and Class
III, Division 1 and 2 Hazardous (classified)
Locations.
• CSA-C22.2 No.142-M1987 (c-UL Approval)
Standard for Process Control Equipment
• CSA-C22.2 No.14-M95
Industrial Control Equipment
• CSA-C22.2 No.213-M1987
*1
Non-incendive Electrical Equipment for
Use in Class I, Division 2 Hazardous
Locations
*1 Rev.1 or later are compliant to this standard.
<Cautions>
Be aware of the following items when
building the CANopen Master Unit into LT:
• If the LT is mounted so as to cool itself
naturally, be sure to install it in a vertical
panel. Also, it’s recommended that the
LT should be mounted at least 100 mm
away from any other adjacent structures
or machine parts. The temperature must
be checked on the final product in which
the LT is installed.
• For use with the following models only:
Models 3481401-01, -02; 3583401-
01, -02, -11, -12, -13, -14.
Product Model No.
UL/c-UL/CSA
Registration Model No.
CA8-CANLT-01 3610007-01
SEE Revision (4 page)