Proface AGP3500 - 10.4 DIO HMI" User Manual

Page 4

Text mode
Original mode

Advertising

<ANSI/ISA-12.12.01-2007/CSA-C22.2,
No.213 - Compliance and Handling
Cautions

(1) Suitable for use in Class I, Division 2,

Groups A, B, C, and D Hazardous
Locations, or Non-Hazardous Loca-
tions only.

(2) “WARNING: Explosion hazard-

substitution of components may impair
suitability for Class I, Division 2”, and
“AVERTISSEMENT: RISQUE
D’EXPLOSION-LA
SUBSTITUTION DE
COMPOSANTS PEUT RENDRE CE
MATERIAL INACCEPTABLE POUR
LES EMPLACEMENTS DE CLASSE
I, DIVISION2”.

(3) WARNING: Explosion hazard-when

in hazardous locations, turn OFF
power before replacing or wiring
modules.

(4) “WARNING: Explosion hazard-do not

disconnect equipment unless power
has been switched off or the area is
known to be Non-Hazardous”, and
“AVERTISSEMENT: RISQUE
D’EXPLOSION-AVANT DE
DECONNECTER L’EQUIPEMENT,
COUPER LE COURANT OU

S’ASSURER QUE
L’EMPLACEMENT EST DESIGNE
NON DANGEREUX”.

*1 Rev.1 or later are compliant to this standard.

CE Marking

This unit is CE marked product that
conforms to EMC directives, EN55011
Class A and EN61000-6-2.

Revision

The revision number of the CANopen
Master Unit is shown in the label affixed to
the CANopen Master Unit. In the example
shown below, an asterisk “*” is displayed
in the position where “A” should be,
meaning “Rev. A”.

Contents

1. Essential Safety Precautions ......... 2
2. Package Contents .......................... 3
3. Supported Model........................... 3
4. About the Manual ......................... 3
5. Inquiry........................................... 3
6. UL/c-UL/CSA Approval............... 3
7. CE Marking................................... 4
8. Revision ........................................ 4
9. Contents ........................................ 4

10. System Design .............................. 5

11. Part Names and Functions ............ 6

12. General Specifications .................. 8

12.1 Electrical Specifications ......... 8
12.2 Environmental Specifications

12.3 Structural Specifications .......... 9

13. CANopen Specifications ................ 9

13.1 CANopen Interface .................. 9
13.2 CANopen Data Transfer Settings 10
13.3 CANopen Cable Arrangement . 10

13.4 CANopen Communication Cable

and Other Recommended Items 11

13.5 Wiring Precautions................... 12