Start up procedure from switch parts, 1 main screen” (page 3-2) – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 16
Monitoring the Ladder Programs of the Connected Device on a Display
PLC Ladder Monitor Operation Manual
2-5
Start up procedure from switch parts
1)
From the [Parts (P)] menu, point to [Switch Lamp (C)] and select [Special Switch (P)] or
click
. Click and drag to place a switch is placed on the screen.
2)
Double-click the switch you placed and in [Special Action] select [Start monitor switch]. In
[Action], select [Ladder Monitor] or [Ladder Monitor (Cache)].
•
Ladder Monitor
Reads the ladder programs from the connected device every time you click the switch.
The ladder program that is being forwarded is displayed on the connected device but it
may take time to read.
•
Ladder Monitor (Cache)
Reads the ladder programs saved on the CF Card when you click the switch, reducing the
read time.To update the ladder programs on the CF Card, in [Main Screen] on the GP,
select [Read].
)
Production Input Screen
Ladder
Monitor
7
1
4
0
8
2
5
.
9
3
6
-
E
N
T