1 details, 2 setup procedure, Details -13 – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 24: Setup procedure -13
Capturing and Saving the Ladder Monitor View on a CF Card
PLC Ladder Monitor Operation Manual
2-13
2.5
Capturing and Saving the Ladder Monitor View on a CF Card
2.5.1
Details
You can capture and save the Ladder Monitor screen on a CF Card.
This allows you to efficiently save and analyze data.
2.5.2
Setup Procedure
1
On the Ladder Monitor main screen, touch [Capture].
2
The currently displayed screen is captured. A folder titled "CAPTURE" is automatically
created in the CF Card root directory (i.e. the top directory), and the data is automatically
saved to this folder. The file name is “CP
∗∗∗∗∗_GP.jpg” and ∗∗∗∗∗ is an automatically
assigned number from 0 to 65535.
• The time required for screen capture differs depending on the image quality
and screen size. The file size for an image quality of 80 is approximately
200k bytes, and the capture (snapshot) takes 5 to 6 seconds. To change the
image quality, from the GP-Pro EX [System Settings], point to [Display
Unit] and select [Mode]. In [Screen/Video Capture Settings] change the
[Capture Image Quality] setting.
• If you continuously touch the capture (snapshot) button, the screens may not
be captured properly. Allow some time between captures (snapshots).
CF Card
Illuminated in red during capturing