Proface APL3000B - Node Box PC - Manual (Page 15)

PS-3710A Series Hardware Manual
1-2
1.1 System Design
1.1.1 PS-3710A Series
The following diagram illustrates the standard range of items that can be connected to PS-3710A Series.
Inside of PS-A
unit
Side of PS-A
unit
Bottom of PS-A
unit
PCMCIA I/F
(2 ports)
DVD-ROM Drive
RGB I/F
FD Drive
Expansion unit I/F
Line Input I/F
USB I/F
(4 ports)
CF Card I/F
(TYPE II, 1 port)
Mike Input I/F
Speaker Out I/F
Hub
Speker
Mike
CF
Central Network Line
*1*2
*3
Main Memory Module
CF Cards *2
*2 *2
CF
CF Cards
Main Memory I/F
Peripherals
(commercial type)
Peripherals
(commercial type)
Peripherals
(commercial type)
PCI Board
(commercial type)
RGB Monitor
(commercial type or Pro-face product
*5
)
(commercial type)
(commercial type)
(commercial type)
CF Card Adaptor
PCMCIA Card
Pin-jack Cable
(commercial type)
RS-232C Cable
COM3
COM1/COM2/COM3/COM4
*4
*1 Built-in accessory only
*2 Digital Electronics Corporation's optional devices and commercial products.
*3 When setting RS-232C mode for COM3.
*4 When setting RS-422 or RS-485 mode for COM3.
*5 RGB monitor is one of the accessories of FP Series manufactured by Pro-face.
*6 Mounted only when the asterisk is not placed at the "1" position for the PS-A revision number.
Please refer to 1.2 Accessories.
Ethernet I/F
(2 ports)
LAN1:10BASE-T/100BASE-TX Cable (commercial type)
LAN2:10BASE-T/100BASE-TX/1000BASE-T Cable (commercial type)
RAS I/F
RAS Cable
(Produces by users)
USB 2.0 Compatible
Peripherals(commercial type)
PS/2 Keyboard
RS-422 Cable
RS-485 Cable
PS/2 Keyboard I/F
IDE I/F
PS3710A-T41-PA1
*1*2
*6