Asoka PL9920-BBR User Manual
Page 21
Reset System Setting to Factory Default
Resets all settings back to the original state of the router. This will clear all
settings you might have previously inputted to the router and will restore
the router WAN IP address back to 192.168.8.1 and Subnet Mask to
255.255.255.0.
Backup System Setting
Save the current setting on the router to a file on a computer or floppy disk.
This is a great tool to have so that you can restore the router’s system set-
ting quickly.
Restore System Setting to the Previous Setting
Revert back to the previous version of setting on the router.
Change Login Password
Change the login password on the web setup interface via 192.168.8.1.
Upgrade Firmware
Update your firmware on the router. Most current version of the firmware
can be found on web site www.asokausa.com.
View Event Log
View entries or event happening at router WAN port.
Asoka™ PlugLink™ PL Cable/DSL Router Manual
20