Asoka PL9920-BBR - Manual (Page 5)

Getting Intimate with your Powerline Device
Before installing your powerline networking device, please take a moment
to examine and familiarize yourself with it. Below is a diagram of the
PL9920-BBR along with a brief description of what each LED and port rep-
resent.
The front panel of the router has a number of LEDs indicating the status of
the device, their functions are:
PWR: Steady light indicates the device is powered up.
RDY: Flashes quickly after the router is powered up. When the router
is ready to use, the LED flashes every second to indicate the router is
functioning normally. If the LED stops flashing or flashes more rapidly
an error has occurred. Refer to the troubleshooting section for help.
LINK: One or more powerline devices have been detected on the net-
work.
ACT: Traffic indicator on the powerline network (will flash occasional-
ly even if no powerline device is connected).
WAN/LAN 1-4 10/100M: If LED is on, the connected device is a
100 Mbps device.
WAN/LAN 1-4 LINK/ACT: Steady light shows a device connected
to the port. Flashes when traffic on the port is detected.
Asoka™ PlugLink™ PL Cable/DSL Router Manual
4