Yokogawa 415 Steam and Gas - Manual (Page 50)

4.3 DATA LOGGING
The Model 415 can be programmed to output data to a printer, computer or other
storage device at the following intervals:
1 minute (Every minute on the minute)
10 minutes (On the hour, at 10 past...etc)
30 minutes (On the hour and half hour)
1 hour (On the hour)
6 hours (At 6:00, 12:00, 18:00 and 24:00)
12 hours (At 12:00 and 24:00)
24 hours (At 24:00)
The totals can be programmed to reset manually via the front panel, or
automatically after each print is initiated, or at 24:00 after the print is initiated.
Note that if manual reset is selected, it is still possible to prevent front panel reset
by inhibiting this function in General Setup (in Calibration).
48 Options