Anschutz 1700 - Manual (Page 24)

47
Sight Set
Folding rear sight and tangent rear
sight
1. Elevation of folding rear sight:
•Loosen slightly both screws at the rear
sight
•Shots are too low:
Raise the slide
•The shots are too high:
Lower the slide
2. Elevation of tangent rear sight:
•Shots are too low:
Raise rear sight elevator
•The shots are too high:
Lower rear sight elevator
3. Windage of folding and tangent
rear sight
To adjust windage to left or right tap the base
of the rear sight in the opposite direction of
the desired change of impact, using a soft
metal such as aluminum or brass punch.
Scope mounts
All ANSCHÜTZ rifles have a grooved,
11 mm rail to accept mounts for a telescopic
sight.
Cleaning, Maintenance, Care,
Lubrication
Even after considerable use, your
ANSCHÜTZ small bore match rifle will not
require much attention - a tribute to its solid
design, first class materials, well proven
ANSCHÜTZ workmanship and precision.
If you follow the recommendations below,
you will help maintain the excellent
performance of your rifle for a long time.
Regular care after every shooting:
•Please only use resin and acid free oils.
•Remove any residues from the barrel.
Clean with a lint-free cloth or pull cleaning
cords several times through the barrel
from chamber to muzzle to remove
deposits. Subsequently pull a slightly
oiled, lint-free cloth or cleaning cords
through the barrel to avoid corrosion.
•Clean the bolt and the loading tray with
a slightly oiled cloth.
•Make sure that the metal parts of your
rifle are protected against corrosion by a
slight oil film. Do not use exessive oil.
•Remove the oil film with a dry cloth or
cleaning cords before you shoot again.
•Some ammunition leaves corrosive parti-
cles in the barrel. Therefore you should
thoroughly clean and oil the barrel each
time immediately after shooting to avoid
corrosion.
Accessories
Please ask for our catalog or take a look at
our websites under www.anschuetz-
sport.com or www.anschutz-sporters.com.