Dsablng the customzed menu – Yokogawa µR20000 User Manual
Page 173
IM 04P02B01-01E
7-36
Dsablng the Customzed Menu
Changng the Settngs
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to enter Basic
Setting mode.
3.
Press the
key or
SHIFT +
key to select
Lock and then press the key.
4.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the
Settng complete screen appears, do either of the following:
To correct the setting the key.
If you are done, press the
ESC key.
Password=
Cust. menu=Not
Basic Cust. menu
Setting complete
Select Cust. menu.
Select Lock.
Enter the Password.
Enter Basic Setting mode.
Select Not.
The new setting takes effect.
Menu kind=Lock
ESC/?
Basic=Cust. menu
Applyng the Changes and Returnng to Operaton Mode
Press the
key or
SHIFT +
key to select
End and then press the key. Press
the
key to select
Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select
Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the
ESC key to
return to the
Basc= screen.
Explanaton
Cust. menu (Customzed Menu)
Use: Displays only the desired Setting mode and FUNC key menus, and locks Basic
Setting mode.
Not: Displays all Setting mode and FUNC key menus, and releases the Basic Setting
mode lock.
Password
The password required to release the customized menu or to enter Basic Setting mode.
Set a password of four digits or fewer, using numbers and spaces.
7.22 Enablng/Dsablng the Customzed Menu