Yokogawa µR20000 - Manual (Page 48)

IM 04P02B01-01E
For the procedure to set the functions, see section 1.10, “Function Setup Guide.”
1-32
1.9 Other Functons
Key Lock
Key lock is a function that prohibits key operations. When key lock is enabled, pressing
keys produces no effect. To release the key lock, a password is entered.
Key Lock Items
Each of the following keys can be included or excluded from the key lock function.
Keys that can be locked
FEED DISP MENU RCD MENU FUNC CH UP
SHIFT ESC/? CHARACTER
1
In the case of the FUNC key, each function of the FUNC key can be included or excluded
from the key lock function.
FUNC key functions:
Alarm ACK execution, computation start/stop, manual printout
and setting printout, message printout, printout buffer clear,
resetting of the periodic printout report data (the average, etc.),
and pen replacement (pen model), ribbon cassette replacement
(dot model)
<Related Topcs> Setting the key lock function: Section 7.10
Using the key lock function: Section 3.13
Customze Menu
The menu can be customized to display only the menus that you use (version 1.31 or
later).
• Display only the items that you use on the FUNC key menu.
• Display only the items that you use on the Setting mode menu.
• Lock Basic Setting mode (use a password to enter the mode).
The pen position adjustment (pen model) and dot printing position adjustment (dot
model) can be set so that they can be used without the password.
Operation mode Setting mode
Displays only the
FUNC key menu
items to be used
Displays only the
setup menu items
to be used
Basic Setting mode
Pen and dot
printing position
adjustment
Password
Hold down
for 3 s
Hold down +
for 3 s
No password
MENU
<Related Topcs> Selecting the FUNC key menu: Section 7.20
Selecting the Setting mode menu: Section 7.21
Enabling/Disabling the customized menu: Section 7.22
Language
The display and recording language can be set to English, Japanese, German, or
French.
• English: Alphabet, numbers, and symbols
• Japanese: Alphabet, numbers, katakana, and symbols
• German: German alphabet, numbers, and symbols
• French: French alphabet, numbers, and symbols
* German and French are supported on version 1.21 or later.
<Related Topcs> Changing the language: Section 7.14