Sterling ME - Manual (Page 24)

— 24 —
TROUBLESHOOTING GUIDE
CHILLED WATER COOLING COIL
PROBLEM PROBABLE CAUSE SOLUTION
1. No or Insuffi cient Cooling Circulating pump failure. Repair or replace pump.*
Chilled water temperature Check chiller.*
not cool enough.
Air binding (air in coil). Bleed coil.
Insuffi cient chilled water fl ow. a. Circulating pump capacity is inadequate.*
b. System piping losses too great.
Insuffi cient air fl ow. a. See air blower troubleshooting.
b. Clogged coil
Air bypassing coil. Caulk safe off.
Undersized system, demand Replace system.*
exceeding cooling system capacity.
Too much outside air. Check outside air dampers.
2. Water in Conditioned Air Exceeding coil face velocity - 600 fpm. Reduce unit air fl ow.
Drain pan P-trap clogged. Clean pan and p-trap.
*Refer to Manufacturer’s Installation and Service Manual.
VIII. REPLACEMENT PARTS
To order Replacement Parts, please provide the
following information to your local representative:
• Model
Number
• Serial Number
• Part description and Number as shown in
Replacement Parts Literature
If further assistance is required, please contact the
manufacturer’s customer service department
IX. SERVICE NOTE
Due to the many confi gurations, options and voltage
characteristics available on Make-Up Air Packaged
Units, the information provided in this manual is
somewhat general in context. Should user or service
organization incur a problem, the nature of which is
not herein, we urge you to contact the manufacturer.
It would be of great assistance to us if you can provide
the model and serial numbers and the wiring diagram
number, as well as the access type.
X. LIMITED WARRANTY
All components are warranted by the manufacturer to be free from defects in material and workmanship for period of one (1)
year from the date of shipment from the manufacturing plant.
The manufacturer will repair or replace, at its option, any component which, upon inspection, it fi nds to be defective, provided
that the Make-Up Air Packaged Unit has been operated within its listed capacity, has been installed in accordance with all
furnished instruction, has not been misused or subjected to neglect and has received reasonable and necessary maintenance.
This warranty does not cover labor costs or other costs incurred in repairing, removing, installing, servicing or handling of parts
or completed products.
This Warranty does not cover loss due to corrosion by chemicals precipitated in the air such as halogenated hydrocarbons. The
manufacturer will in no event be liable for incidental or consequential damages of any kind whatsoever.
Written permission is required prior to the return of defective components. All returns must be sent with all transportation
charges prepaid to the plant designated in the written permission. This warranty is extended only to the original owner of the
Make-Up Air Package Unit.