PreSonus StudioLive Remote - Manual (Page 11)

7
Addendum for
StudioLive Mixers
Ov
er
view
StudioLiv
e
Remot
e
QMix
Tr
oubleshooting
Universal Control 1.6 with VSL 2
Univ
ersal
Con
trol and VSL
Installation for Mac OS X 2.3
2.3 Installation for Mac OS X
The Universal Control Installer will take you through each step of the
installation process. Please read each message carefully, and be especially
careful that you do not connect your StudioLive too soon.
1. After launching the installer, you will be directed to
the Welcome screen.
Click “Continue” and follow the onscreen
instructions.
2. You will be directed to choose the hard drive onto
which you want to install the StudioLive driver and
Universal Control with VSL. You must choose your
system drive. Storage drives and partitions cannot
be used as hosts for the driver.
Once the installation is completed, you will
find the Universal Control program in your
Applications folder. It is recommended
that you place this in your Dock.
Click “Install.”
3. When the installation is completed, you will be
prompted to reboot your computer. After it has
restarted, connect your StudioLive to your Mac with
a FireWire cable and power it on. You are now ready
to use your StudioLive!