PreSonus StudioLive Remote - Manual (Page 22)

18
Ov
er
view
StudioLiv
e
Remot
e
QMix
Troubleshooting
PreSonus Universal Control 1.6,
StudioLive Remote 1.3, and QMix 1.1
2 Universal Control 1.6 with VSL
Univ
ersal
Con
trol and VSL
2.5 VSL: Virtual StudioLive
2.5.4 Loading Scenes and Presets from VSL
As stated in the previous section, the Browser window in VSL functions
in much the same way as the browser in Studio One. To load a Scene or
preset from the Browser window, simply select it and drag it over the
mixer or channel on which you wish to load it. Scenes and presets can
be dragged from either the On the Disk or the Device Memory section
of the browser and dropped onto the Overview or the Channel tab.
Loading a Scene
To load a new Scene on your StudioLive, select it from the Browser
window and drag it over the mixer in either the Overview or the Channel
tab. The window will gray out, indicating that a new Scene is about to be
loaded. Note that only the parameters that have been enabled for recall
on the StudioLive will be recalled on the mixer.
Loading Scribble Strip Labels
Scribble Strip labels are stored with your Scenes. You can load just the
labels by selecting the Scene from the Browser window and dragging it
over the row of Scribble Strips above the Channel Faders. The Scribble
Strips will gray out, indicating that the Scribble Strip labels from the
Scene are about to be loaded.
Loading an Entire Fat Channel Preset
To load every component in a Fat Channel preset (gate, compressor, EQ,
etc.), select the preset from the Browser window and drag it over any part
of the desired channel. If you drag it over any of the component Quick
Views, it will load only that component (e.g., if you drag a preset over the
gate Quick View, only the gate will be loaded).