PreSonus StudioLive Remote - Manual (Page 16)

12
Ov
er
view
StudioLiv
e
Remot
e
QMix
Troubleshooting
PreSonus Universal Control 1.6,
StudioLive Remote 1.3, and QMix 1.1
2 Universal Control 1.6 with VSL
Univ
ersal
Con
trol and VSL
2.5 VSL: Virtual StudioLive
Get Button Transfers All Scenes, Fat Channel, FX, and Graphic EQ Presets
Stored on the StudioLive to VSL.
When you first launch VSL, you will need to create a
link between your StudioLive‘s internal memory and
your computer. To do this, click on the Get button.
A dialog will open, prompting you to click the transfer
button. Any settings that are temporarily stored in the
local cache (i.e., settings that are currently visible in
the Device Memory section of the Browser window)
will be overwritten.
Add to Disk Button Transfers all Scenes, Fat Channel, FX, and Graphic EQ Presets
from Temporary Memory to the Permanent Cache.
VSL allows you to back up your Scenes, Fat Channel, FX, and graphic EQ
presets and permanently store them on your computer. Each type of
preset can be added separately. In this way, you can back up only what
you want, when you want.
To move a Scene or preset from temporary memory into
permanent memory, simply select one preset or Scene and
click the Add to Disk button. To select multiple presets,
hold the Shift key while making your selections.
Note: If you want to be able to remotely recall scenes using SL Remote,
you must first transfer your Scenes to the permanent cache. Only scenes displayed
in the On Disk section of the Browser will be available to recall in SL Remote.
Browser Tab Buttons Displays the Different Preset Categories on
Your StudioLive and on Your Computer.
All of your Scenes and presets are contained in dedicated folders in VSL.
To view a specific set of presets, simply click on its tab.
• SCENE. Displays stored Scenes.
• FAT CH. Displays stored Fat Channel presets.
• FX. Displays stored effects presets.
• GEQ. Displays graphic EQ presets.
• BACKUP. Displays any backup logs that have been created in VSL.