Brocade Fixed Rack Mount Kit Installation Procedure (Supporting VA-40FC, VDX 6710-54, VDX 6720-24, VDX 6720-60, VDX 6730-32, and VDX 6730-76) - Manual (Page 11)

Fixed Rack Mount Kit Installation Procedure 11 of 12
53-1001274-06
Attaching the rear brackets to the front brackets
Complete the following steps to attach the rear brackets to the front brackets.
1. Position the right rear bracket inside the right front bracket, as shown in Figure 4 .
2. Attach the brackets using four 6-32 x 1/4-in. screws.
3. Repeat step 1 and step 2 to attach the left rear bracket to the left front bracket.
4. Adjust the brackets to the rack depth and tighten all the 6-32 x 1/4-in. screws to a torque of 9 in-lbs (10 cm-kgs).
FIGURE 4 Attaching the rear brackets to the front brackets
1 Bracket, front right 3 Bracket, rear right
2 Screw, 6-32 x 1/4-in., flathead Phillips